煤矿瓦斯和煤尘监控的数学模型

结合2006年全国大学生数学建模竟赛D题,借助Matlab软件,通过数学建模,计算出有关煤矿瓦斯和煤尘的3个主要安全指标,从而为解决煤矿实际安全生产提供了参考.     

基于简单碰撞理论煤粉燃烧动力学模型的研究-PART Ⅲ:氧气可达比表面积

根据不同温度下氧分子平均自由程的大小,比较了小孔、中孔和大孔中三种扩散速率与煤焦表面燃烧速度的大小.研究表明2000 K以内,颗粒表面分子扩散速率比氧化反应速率大1个数量级以上,过度扩散速率不小于氧化速率.温度小于1200K时,燃烧速率比Knudsen扩散速率小1～5个数量级,扩散孔径小于15～28 nm,反应主要在内外表面进行;1200～1600K时,燃烧速率与Knudsen扩散速率相当,扩散临界孔径28～38 nm,反应在外表面及浅层内表面进行;温度1600K以上时,Knudsen扩散速率比燃烧速率小1个数量级,孔径38～50 nm以下内表面上碳的氧化速度受扩散控制.煤焦的氧化主要发生在Knudsen扩散临界孔径10～50 nm以上的氧气可达表面上.     

乙烷对冲扩散火焰中PAHs的生成

本文使用详细的化学反应机理模拟了C2H6／O2／N2／AR层流对冲扩散火焰中多环芳烃的生成动力学过程。反应机理包括96种组分的502个基元反应。通过数值计算分析了层流对冲火焰的结构和主要反应物、中间物质和反应产物的浓度变化,并与相关文献的实验结果进行了比较。结果表明,数值模拟在燃烧过程和PAH生成规律上与实验结果是一致的,但在某些组分的定量预报上存在一定的差别。     

Simulation of a turbulent premixed open V-shaped flame using contour advection with surgery

Despite its capability of high spatial resolution, simulation of turbulent flows with traditional Lagrangian (front tracking) scheme is often discouraged by numerical instability caused by clustering of marker nodes and topological changes of fronts. Contour advection surgery (CAS), being a robust front tracking scheme, can limit the growth of front complexity during simulation without jeopardizing accuracy or efficiency. This allows it to open up an advantage over traditional front-tracking schemes. It has already been demonstrated that CAS, with incorporation of the reaction sheet model, can accurately simulate the propagation and advection of a turbulent premixed V-shaped flame. In this study, it is further tested with 10 values of vortex circulation. A range of upstream turbulence levels of 1.8–19.8% was obtained. Results indicate that upstream turbulence increase the average flame length, flame zone area and the overall burning rate. Flame surface density Σ was also estimated. Maximum values of Σ obtained lie in the range 0.1–1.4 mm⁻¹. Skewness towards the burnt region was observed in all profiles of Σ. Similar to results from laboratory experiments, it was found that Σ values decreases with upstream turbulence. From this study, the ability of CAS to cope with intense turbulence is demonstrated and a better quantitative understanding on the scheme has also been acquired.     

The thermolysis of dicarbonylcyclopentadienyliron dimer: The formation of biferrocene

The thermolysis of dicarbonylcyclopentadienyliron dimer in a sealed tube at 300°C has been reported to produce ferrocene, carbon monoxide, carbon dioxide, cyclopentadiene and elemental iron. We observe in addition to these products the production of biferrocene and elemental carbon. Thermolysis of carbonylcyclopentadienyliron tetramer (produced from the dimer by thermolysis in refluxing xylene) produces ferrocene, iron and carbon monoxidre; no biferrocene, carbon dioxide or elemental carbon are produced. A scheme is proposed to account for these products.     

多功能旋流燃烧器的工业性试验研究

秦皇岛热电厂2＃锅炉燃烧不稳定、燃烧效率低等问题主要是由于燃烧器的一次风管道结构不合理造成的。本文采用多功能旋流燃烧器的设计思想对旋流燃烧器进行了技术改造和工业性试验研究。结果表明,改造后的旋流燃烧器其着火点提前,并且仅改造6只主力燃烧器就可以使锅炉在50％负荷时达到不投油而稳定燃烧,排烟温度、飞灰含碳量和NOx排放量明显下降。     

Synthesis and copolymerization of new phosphorus‐containing acrylates

Two phosphorus‐containing acrylate monomers were synthesized from the reaction of ethyl α‐chloromethyl acrylate and t‐butyl α‐bromomethyl acrylate with triethyl phosphite. The selective hydrolysis of the ethyl ester monomer with trimethylsilyl bromide (TMSBr) gave a phosphonic acid monomer. The attempted bulk polymerizations of the monomers at 57–60 °C with 2,2′‐azobisisobutyronitrile (AIBN) were unsuccessful; however, the monomers were copolymerized with methyl methacrylate (MMA) in bulk at 60 °C with AIBN. The resulting copolymers produced chars on burning, showing potential as flame‐retardant materials. Additionally, α‐(chloromethyl)acryloyl chloride (CMAC) was reacted with diethyl (hydroxymethyl)phosphonate to obtain a new monomer with identical ester and ether moieties. This monomer was hydrolyzed with TMSBr, homopolymerized, and copolymerized with MMA. The thermal stabilities of the copolymers increased with increasing amounts of the phosphonate monomer in the copolymers. A new route to highly reactive phosphorus‐containing acrylate monomers was developed. A new derivative of CMAC with mixed ester and ether groups was synthesized by substitution, first with diethyl (hydroxymethyl)phosphonate and then with sodium acetate. This monomer showed the highest reactivity and gave a crosslinked polymer. The incorporation of an ester group increased the rate of polymerization. The relative reactivities of the synthesized monomers in photopolymerizations were determined and compared with those of the other phosphorous‐containing acrylate monomers. Changing the monomer structure allowed control of the polymerization reactivity so that new phosphorus‐containing polymers with desirable properties could be obtained. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2207–2217, 2003     

Preparation,thermal properties,and flame retardance of epoxy–silica hybrid resins

A novel epoxy system was developed through the in situ curing of bisphenol A type epoxy and 4,4′‐diaminodiphenylmethane with the sol–gel reaction of a phosphorus‐containing trimethoxysilane (DOPO–GPTMS), which was prepared from the reaction of 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) with 3‐glycidoxypropyltrimethoxysilane (GPTMS). The preparation of DOPO–GPTMS was confirmed with Fourier transform infrared, ¹H and ³¹P NMR, and elemental analysis. The resulting organic–inorganic hybrid epoxy resins exhibited a high glass‐transition temperature (167 °C), good thermal stability over 320 °C, and a high limited oxygen index of 28.5. The synergism of phosphorus and silicon on flame retardance was observed. Moreover, the kinetics of the thermal oxidative degradation of the hybrid epoxy resins were studied. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2354–2367, 2003     

燃煤过程痕量元素动力学机理的研究进展

由于痕量元素在煤中的含量低微、检测困难,加之其原子量一般较大,可能的反应途径多,使得相关的反应机理研究难度极大。本文结合作者的研究成果,介绍了煤燃烧过程中痕量元素化学反应动力学的国内外研究进展,包括痕量元素化学动力学机理的建立;相关的典型实验、计算模拟及其实验验证、动力学机理模型的简化;痕量元素反应动力学机理的完善和发展,包括采用简单碰撞理论、活化络合物理论(亦称过渡态理论,或绝对反应速率理论)对痕量元素化学反应动力学机理的修正;最后指出煤燃烧过程中痕量元素动力学研究的若干方向是: (1)痕量元素反应动力学模型数据库的建立;(2)煤燃烧过程中,主量元素和次量元素的动力学机理的完善; (3)各痕量元素之间动力学研究的开展; (4)实际燃烧过程中痕量元素动力学行为的研究。     

The preparation and structure of 1,4,5,6,7,7-hexachloro-2-endo-ferrocenylhydroxymethyl-3-endo-hydroxymethyl-5-norbornene

The crystal structure of a novel ferrocene derivative with potential flame-retardant/smoke-suppressant activity, 1,4,5,6,7,7-hexachloro-2-endo-ferrocenyl-hydroxymethyl-3-endo-hydroxymethyl-5-norbornene, has been determined. Some of the carbon–carbon bonds within the chlorendic residue are unusually long, and there is no interaction between the hydroxyl groups and the iron atom. There is evidence of intramolecular hydrogen bonding between the two hydroxyl groups.